How to make a glasses case

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Watch a video version of this guide!!

Prepare the template that is larger than the actual size of the glasses.

Cut out the leather with a leather cutter. Be careful not to cut your fingers!

These are all the materials you will need to complete the project.

Draw a line to show the sewing line.At this time, draw a line about 0.1 inch away the sewing line from the edge.

Apply oil to the leather edge and polish it with the stick of the wood.

At this time, draw a line on the glasses to make the sewing line.Pierce it with a hammer on the sewing line.

Sew it with a thread. Use the thread which I pulled with solder.

Sew it with the wax cord.

Glue the belt together using elastomeric adhesive which is used to glue leather.

After the glue has dried, sew it with the wax cord.

Apply oil to the leather edge and polish it with the stick of the wood.

There is an inside pocket.

You have completed your project.Congratulations!!

Watch the video: Stuart Hillard Makes.. A Glasses Case


  1. Morn

    I think you admit the mistake. I can prove it.

  2. Rayne

    very useful information

  3. Kafele

    It's happiness!

  4. Ghazi

    Excuse, that I interrupt you, but, in my opinion, this theme is not so actual.

Write a message

Previous Article

How to create baby cards

Next Article

How to play piggy in the middle